If you're searching for a place to store your RV, boat, or farm equipment near Paris, Tennessee or Kentucky Lake, a custom pole barn built on your property gives you secure, weather-tight storage without the monthly rental fees. Serving Waverly, Humphreys County, Henry County (including Paris, Puryear, and Springville), and the surrounding Middle Tennessee area, PAC Building Pro designs and builds post-frame storage buildings sized for everything from pontoon boats to Class A motorhomes to tractors and hay equipment.
What Size Pole Barn Do I Need for an RV or Boat?
The size you need depends on what you're storing and whether you want room to walk around, set up a workbench, or park additional vehicles.
- Pontoon or smaller boat (16–26 feet): A 30×40 or 40×40 enclosed building fits a Class 1 boat with trailer and leaves space for gear storage.
- Travel trailer or fifth-wheel (under 35 feet): A 30×40×14 or 30×48×14 pole barn works well, with a 14-foot overhead door and at least 16-foot eave height to clear the door frame.
- Class A motorhome (40 feet long, 13 feet tall): Plan for a building at least 44–50 feet deep with a 14- to 16-foot overhead door, so eave height must be at least 16 feet.
- Farm equipment and shop space: A 40×60 pole barn gives you 2,400 square feet—enough for three to four vehicles, a full workshop area, and additional storage for tools, ATV's, or seasonal equipment.
RV storage buildings need overhead doors at least 14 feet tall, so eave height must measure at least 16 feet to accommodate the door header and track. If you're planning to add a loft or insulation later, going with a taller sidewall upfront saves on future modifications.
| Building Size | Typical Use | Door Height Needed |
|---|---|---|
| 30×40×12 | Pontoon boat, small RV, or equipment | 10–12 ft |
| 30×48×14 | Travel trailer, fifth-wheel under 35 ft | 14 ft |
| 40×60×16 | Class A motorhome, multiple vehicles, workshop | 14–16 ft |
| 40×40×14 | Bass boat or pontoon + gear storage | 12–14 ft |
Post-Frame (Pole Barn): What Is It?
PAC builds post-frame (pole barn) structures for buyers in Humphreys County, Henry County, and Benton County who need cost-effective, durable storage for RVs, boats, and equipment.
Post-frame construction uses treated wood posts set in the ground or on piers, with metal roofing and siding. It's fast to build, cost-effective for larger spans, and the standard choice for agricultural storage, equipment sheds, and RV or boat covers.
Post-frame buildings are engineered to the same local snow and wind loads as any other structure. The choice of building method comes down to budget, how you'll use the building, and any local code requirements in your county or city.
Get a free, no-pressure quote at pacbuildingpro.com or call (931) 296-2777.
How Much Does a Pole Barn Cost for RV or Boat Storage?
Cost varies by size, eave height, whether the building is fully enclosed or open-sided, the number and size of doors, and any additional features like insulation, concrete floor, or electrical wiring. A bare-bones shell with a dirt floor costs far less than a fully enclosed building with electric overhead doors and a finished concrete slab.
Because every project is different—site conditions, local permit requirements, door specifications, and finish level all matter—the only way to get an accurate number is to request a quote. PAC works with you to design a building that fits your storage needs and budget, and financing is available for qualified buyers.
Do I Need a Building Permit Near Paris or Kentucky Lake?
Permit requirements vary significantly by county and whether your property is inside city limits or in the unincorporated county.
Henry County (Paris, Puryear, Springville): Requirements vary—confirm with your local building department or county clerk for your specific property.
Humphreys County (Waverly, New Johnsonville, McEwen): No building permit is required in the unincorporated county, but a permit is required inside city limits, and a county site close to city limits may need a separately purchased zoning permit.
Every other county in Middle Tennessee—Benton, Houston, Dickson, Stewart, and others—has its own rules. Some rural counties do not require permits for agricultural structures, while others do. Always verify with your local building department or county clerk before construction.
Do I Need Engineered or Stamped Plans?
Whether engineered or engineer-stamped (PE-stamped) plans are required depends entirely on the local codes department for your county and whether your site is inside city limits. Many rural Middle Tennessee counties—for example, Humphreys County—do not require engineered or stamped plans, while some municipalities do.
PAC provides building drawings engineered for Middle Tennessee's snow and wind loads (10 psf ground snow load and 90 mph wind speed). If your county or city requires PE-stamped plans, PAC can provide them on request for an additional cost and lead time. Requirements vary by jurisdiction and project type, so confirm with your local codes office before starting construction.
Where Does PAC Build Pole Barns Near Paris and Kentucky Lake?
PAC Building Pro is based in Waverly, the county seat of Humphreys County in Middle Tennessee, and builds custom pole barns throughout a roughly 70-mile radius.
We serve Henry County (Paris, Puryear, Springville), Humphreys County (Waverly, New Johnsonville, McEwen, Hurricane Mills), Houston County (Erin, Tennessee Ridge), Benton County (Camden, Big Sandy), Dickson County (Dickson, White Bluff, Charlotte), Perry County (Linden, Lobelville), and Hickman County (Centerville). We also build in Stewart County (Dover, Cumberland City), Decatur County (Decaturville, Parsons), Henderson County (Lexington), Carroll County (Huntingdon, McKenzie), and other surrounding Middle Tennessee counties.
For buyers near the Kentucky state line, PAC delivers prefab packages—portable buildings, steel carports, and prefab metal garages—to Murray, Cadiz, and Hopkinsville, Kentucky. PAC does not build or install on-site in Kentucky; delivery-only packages are available across the state line, but custom pole barn construction is provided only in Tennessee.
Frequently Asked Questions
What's the best size pole barn for a 40-foot RV?
A Class A motorhome that's 40 feet long and up to 13 feet tall needs a building at least 44–50 feet deep with a 14- to 16-foot overhead door, so plan for at least 16-foot eave height to accommodate the door frame and track.
Can I use a pole barn for both boat storage and a workshop?
Yes. A 40×60 pole barn gives you 2,400 square feet—enough space for three to four vehicles or a boat and trailer, plus a full workshop area with room for tools, benches, and additional storage.
Do I need a building permit for a pole barn in Henry County?
Permit requirements vary by county and whether your property is inside city limits or in the unincorporated county. Always verify with the local building department or county clerk for your specific property.
Can PAC build a pole barn on my property in Kentucky near Kentucky Lake?
PAC does not build or install on-site in Kentucky. We deliver prefab packages—portable buildings, carports, and prefab metal garages—to Murray, Cadiz, and Hopkinsville, but custom pole barn construction is provided only in Tennessee.
Ready to build your RV, boat, or equipment storage building? PAC Building Pro designs and builds custom pole barns for buyers in Henry County, Humphreys County, and across Middle Tennessee. Get a free quote at pacbuildingpro.com or call (931) 296-2777 to talk through your project.