Get Started
Get Started

Animal Shelters

Our Animal Shelter has a 4x6in pressure treated perimeter base to make it deliverable by our drivers yet will resist rotting from ground moisture. You can add stalls, partitions, or a tack room depending on the size. Animal Shelters are ENGINEER CERTIFIED!

With our Animal Shelters, don’t be afraid of maximizing the space for your animals by adding multiple stalls. Tack rooms can also be used as an additional storage space for farm goods and small tools, or even a workspace for projects.

 Build & Price
Animal Shelter

The Basics Of Our animal shelters

Our Animal Shelters were designed with your animals in mind. When bad weather starts to roll in, having a place for your animals to go to is a safe choice and a smart investment. Our Animal Shelters can be built using pressure treated T1-11 siding as well as our LP Smart Panel™ siding and the roofing choices can be metal siding or shingles.

  • 4in x 6in Pressure Treated perimeter base
  • 1-1/4in Pressure Treated Kick Boards approximately 4ft high, spaced 1-1/2in apart
  • One stall is standard per 12ft of length (10ft x 12ft = 1 stall, 10ft x 20ft = 1 stall, 10ft x 24ft = 2 stalls). Tack room is not included**
  • Additional stalls (includes opening and divider) can be added for an additional cost (optional)
  • Ground must be suitable for application prior to delivery
  • Buildings will be set directly on ground with no blocking.

AVAILABLE SIZES ON OUR ANIMAL SHELTERS

Below you will see the standard sizes that our Animal Shelters are built in. There are occasions where we are able to build them with some basic size modifications, but that must be discussed with your local dealer and shop to see if your modifications fall within the parameters of the Backyard Outfitters factory in your area. The standard Animal Shelter sizes are:

10' Wide

10'x10'

10'x12'

10'x14'

10'x16'

10'x20'

12' Wide

12'x16'

12'x20'

12'x24'

12'x28'

12'x32'

12'x36'

12'x40'

A NOTE ABOUT OUR TACK ROOMS

  • Tack rooms require a minimum of 4ft added to the 12ft of length needed per stall (E.g., 1-stall plus a 4ft wide tack room requires a minimum of 16ft total length)
  • Standard Tack Room placement starts on an end wall.
  • Additional cost to start on an inside divider wall (E.g., Centered between two stalls)
  • Tongue and Groove, Engineered Panels flooring
  • OSB divider wall between tack room and stall
  • 3ft Wooden Barn Door on all tack rooms or upgrade to 4ft Wooden Barn Door