Concrete Mix 80lb.

42bg. Per Pallet


Pakmix® Concrete Mix is a specially formulated blend of Portland cement, sand, and gravel ideal where a thickness of 2″ or greater is required. Simply add water.

It may be used for:

  • Setting Posts
  • Deck Supports
  • Footings
  • Curbs
  • Sidewalks
  • Steps
  • Patios
  • Concrete Floors
  • Items You May Need
    • Wheelbarrow, mortar box or mixer • Tools and materials for building forms
    • Trowel and/or float • Broom
    • Shovel or hoe
  • For Best Results
    Use only when the temperature is 40° F and rising. In cold weather use warm, not hot, water for mixing.
    Apply freshly mixed Pakmix® Concrete Mix immediately. Do not retemper the mix after initial mixing.
    Dampen the surface of the work area before applying the new material.
    For a rough or non-slip surface, use a wooden float or a broom. For a smooth finish, use a steel trowel. Avoid over-troweling.

Preperation & Mixing

All surfaces should be clean and free of oil, gas, paint, grease, etc. before apply the mix. A stone or gravel
base is recommended for all work on grade.

Directions for Mixing
Pour Pakmix® Concrete Mix into a clean wheelbarrow, mortar box or similar easy-to-use container. Form a
crater with a shovel or hoe in the center of the dry mix. Pour clean water into the crater at a rate of 1 quart
per 20 lbs of Pakmix® Concrete Mix. If this is too stiff, add more water one cup at a time. Avoid a soupy
mix – over watering will weaken the strength considerably.

Packaging & Yields

80 lb bag yields approximately 4 sq ft x 2″ thick or approximately 3/5 cu ft wet volume.


Hello! Click below to message us using WhatsApp.