If you're looking for a steel carport in Waverly, Camden, or anywhere around the Kentucky Lake area of Middle Tennessee, you've probably got questions about sizes, permits, what the structure needs to handle, and how much it'll cost. We're PAC Building Pro in Waverly—right here in Humphreys County—and we deliver and install steel carports across a 70-mile radius, including Benton County, Houston County, Perry County, and the surrounding area. This guide walks through the facts that matter when you're shopping for a metal carport in this part of Tennessee.
What Size Steel Carport Do I Need?
The right size depends on what you're covering and whether you want room to move around it. Here's how common carport sizes break down:
| Size | Typical Use |
|---|---|
| 12×20 to 12×24 | Single compact vehicle, lawn mower, or small equipment |
| 18×20 to 20×24 | One car with workspace or storage on the side |
| 20×30 to 24×30 | Two vehicles, or a truck plus ATV or boat |
| 24×40 and larger | Multiple vehicles, RV, or combined storage and workshop |
A 12×24 works fine for a single car or compact truck if you're just looking for weather protection. If you've got a full-size truck, a side-by-side, and a boat, you'll probably want at least a 24×30. Bigger structures give you room to walk around and store gear without squeezing.
What Do Steel Carports in Middle Tennessee Need to Handle?
Middle Tennessee—including Humphreys, Benton, Houston, Dickson, Hickman, and Perry counties—has a ground snow load of 10 psf. The design wind speed for Tennessee is 110–115 mph (three-second gust) statewide. Steel carports here typically use 14-gauge or 12-gauge steel framing, and you'll see roof styles ranging from regular or boxed eave (lower cost, good for most uses) to vertical roof (better for snow and debris shedding, recommended if you're storing anything tall or valuable).
If your county or city codes office requires engineer-stamped (PE-stamped) plans, we can provide them on request—there's an added cost and lead time, but many rural Middle Tennessee counties don't require stamped plans. It's worth a quick call to your local building or codes department to confirm what's needed where you're building.
Contact PAC Building Pro for a free estimate at pacbuildingpro.com or call (931) 296-2777.
Do I Need a Permit for a Steel Carport in Waverly, Camden, or Humphreys County?
Permit requirements vary by jurisdiction in Tennessee. For Benton County, Houston County, and other counties and cities in our service area, requirements vary—it's essential to confirm with your local building or codes department to determine the specific requirements for your area.
Some Tennessee counties offer agricultural exemptions for structures used in commercial farm production, verified by IRS Schedule F or an Agricultural Sales and Use Tax Exemption certificate, but requirements differ by jurisdiction.
The building permit itself is the customer's responsibility. We recommend checking with your county building or codes department to confirm the specific requirements for your site before you order.
What Affects the Cost of a Steel Carport?
Price varies based on several factors, and it's hard to quote a number without knowing your specifics. Here's what drives cost:
- Size: A 12×20 single-car carport costs less than a 24×40 multi-vehicle or RV cover.
- Gauge of steel: 14-gauge framing is standard and economical; 12-gauge is heavier and costs more but adds strength.
- Roof style: Regular or boxed eave roofs are the most affordable. Vertical roofs (panels run from peak to eave) cost more but shed snow and leaves better and are recommended for larger or taller structures.
- Certification and engineering: If your jurisdiction requires PE-stamped plans, that adds cost and lead time.
- Site preparation and anchoring: Level sites with good drainage cost less to prep. Anchoring method (ground anchors, concrete footers, or a full slab) affects the total project cost.
The best way to know what a carport will cost for your situation is to get a quote based on your size, roof style, site, and any local code requirements. Every project is a little different.
Where Does PAC Build and Deliver Steel Carports?
We're based in Waverly, the county seat of Humphreys County, and we serve Middle Tennessee within roughly a 70-mile radius. That includes close-in counties like Benton (Camden, Big Sandy), Houston (Erin, Tennessee Ridge), Perry (Linden, Lobelville), Hickman (Centerville), and Dickson (Dickson, White Bluff, Charlotte), as well as Henry County around Paris.
We also build and deliver farther out to places like Clarksville in Montgomery County, Springfield and Greenbrier in Robertson County, Nashville and Davidson County, Columbia and Spring Hill in Maury County, Jackson in Madison County, and Savannah in Hardin County. Free delivery and installation applies within 30 miles of Waverly; delivery is available beyond that across our service area.
Across the state line in western Kentucky—Murray, Cadiz, and Hopkinsville—we deliver prefab packages only (portable buildings, steel carports, and prefab metal garages). We do not perform on-site construction or install pole barns in Kentucky.
Frequently Asked Questions
Are engineered plans required for a steel carport in Humphreys County or Benton County?
Engineered or engineer-stamped (PE-stamped) plans are not always required—it depends entirely on your local codes department and whether your site is inside city limits. Many rural Middle Tennessee counties do not require stamped plans, while some cities and counties do. PAC can provide PE-stamped plans on request when a jurisdiction requires them. Check with your county or city codes office to confirm what's needed for your location.
Can I get a steel carport on a rent-to-own plan with no credit check?
Yes. Steel carports are available rent-to-own with no credit check, and PAC also offers cash purchase and financing options. Free delivery and installation is included within 30 miles of Waverly in Humphreys County.
What's the difference between a regular roof and a vertical roof on a steel carport?
A regular or boxed eave roof has horizontal panels and is the most economical option, suitable for most car and equipment storage. A vertical roof has panels that run from the peak to the eave, which sheds snow, rain, and debris better and is recommended for taller or more valuable storage like RVs or boats. Vertical roofs cost more but offer better long-term performance.
How long does it take to get a steel carport delivered and installed in the Camden or Kentucky Lake area?
Lead time varies based on size, roof style, and whether engineer-stamped plans are required by your jurisdiction. Once your order is confirmed and any required permitting is sorted, most standard carports can be scheduled for delivery and installation within a few weeks. Contact PAC for a current estimate based on your specific build.
Ready to get started? Whether you're in Waverly, Camden, New Johnsonville, Erin, or anywhere around Kentucky Lake and Middle Tennessee, PAC Building Pro can help you find the right steel carport for your vehicles, equipment, or lake gear. Get a free, no-pressure quote at pacbuildingpro.com or give us a call at (931) 296-2777. We're here to answer your questions and walk you through the options.